Acrylic Sign Care & Installation

Acrylic Sign Care

Please review the following guidelines to make sure your sign remains in the best condition possible.

•Please handle your sign with care when unpacking.

• If you wish to polish or clean your sign to remove any fingerprints when installing, please use a clean microfibre cloth, we find this works best.

• When polishing or cleaning your sign, please be gentle around the wording. Although our signs are made with high quality, durable outdoor vinyl, some fonts are more delicate than others. We prompt you to take caution to avoid damages.

• Please take care while attaching your signage to your home, you should not scrape or press your sign against the wall under any circumstance as this will cause damages to the paint work!

• DO NOT OVER -TIGHTEN THE SCREWS.

HOW TO INSTALL YOUR HOME DOOR SIGN

You've just received your beautiful acrylic 3D home door sign from us and you're wondering: "how do I put this up?" Well don't worry, we've got you covered with this simple, quick-read guide to help you install your sign correctly and avoid possible damages!

STEP 1: Marking out the holes.

Once you have found the perfect place to install your sign, It's now time to mark out the area with your drill points. Grab a felt tip pen and line your sign up into the position you want to hang it. Make sure whilst completing this step you do not to press your sign against the wall to avoid any paint damages! Keeping still, place the tip of the pen into all of the pre-drilled holes in your sign to pinpoint the drill locations.

STEP 2: Drilling the holes and inserting in the wall plugs.

Once the hole positions have been correctly marked, grab your electric drill and drill into all of the hole marks you have previously made. After you're finished, insert all the wall plugs into the holes. If they do not fit all the way, simply drill a little further and re-insert until they fit perfectly in.

STEP 3: Screw your sign into place and screw on our signature screw caps.

Carefully pick up your sign, the screws, and a screwdriver, and line your home door sign up with the holes / wall plugs. Once again we prompt you to take caution when installing, do not press or scrape your sign against the exterior of your home whilst doing so. Then, one by one, gently place the screws in and tighten them up by twisting the screwdriver in a clockwise direction, making sure to not over- tighten this screws to avoid the acrylic splitting. Do this for all the remaining holes. Once you have screws in place and your sign is securely attached to your home, screw on our caps and you are finished!

Now the sign is secured to your home, you can now admire your handy work! Your sign will now sit in place safely for many years to come.